TJ-II:Langmuir Probes

From FusionWiki
Revision as of 11:43, 22 October 2014 by Daniellopezbruna (talk | contribs)
Jump to navigation Jump to search
Location of the reciprocating Langmuir probes at TJ-II

TJ-II has two fast reciprocating drives for Langmuir probes (with a displacement velocity of approximately 1 m/s). [1] [2] [3] Probe drive 1 is located at φ = 38.2°, R=134 cm (sector D4) and probe drive 2 at φ = 195° (sector B2).

Probe heads

Several different heads can be mounted on the reciprocating drives: e.g., staircase Langmuir probes, a rake probe (as of 2009), or a multi-pin Langmuir probe (2010). A biasing probe has also been used.

Photo of a staircase Langmuir probe head with three sets of measurement pins
Photo of a multipin Langmuir probe head
Photo of a Langmuir rake probe head

See also

References

  1. ↑ M.A. Pedrosa et al, Fast movable remotely controlled Langmuir probe system, Rev. Sci. Instrum. 70 (1999) 415
  2. ↑ E. Calderón et al, On the Influence of Probe Presheath on the Measurement of Fluctuation and E × B Turbulent Transport by Langmuir Probes, Contributions to Plasma Physics 44, Issue 7-8 (2004) 700 - 704
  3. ↑ M.A. Pedrosa et al, Evidence of Long-Distance Correlation of Fluctuations during Edge Transitions to Improved-Confinement Regimes in the TJ-II Stellarator, Phys. Rev. Lett. 100 (2008) 215003
Retrieved from "http://wiki.fusenet.eu/fusionwiki/index.php?title=TJ-II:Langmuir_Probes&oldid=4751"