FusionWiki

Unipolar arcing: Difference between revisions

Page Discussion

Unipolar arcing (view source)

Revision as of 18:59, 6 November 2013

1,452 bytes removed ,  6 November 2013
no edit summary
No edit summary
No edit summary
Line 3: Line 3:
Unipolar arcing is a phenomenon which may occur in plasma devices between the plasma and the cathode. This cathodic process features localized, bright, tiny spots on the cathode surface, which appear to move more or less randomly. At these spots, the cathode material makes a transition into dense plasma, which then expands rapidly into the vacuum or low-pressure ambient gas.
Unipolar arcing is a phenomenon which may occur in plasma devices between the plasma and the cathode. This cathodic process features localized, bright, tiny spots on the cathode surface, which appear to move more or less randomly. At these spots, the cathode material makes a transition into dense plasma, which then expands rapidly into the vacuum or low-pressure ambient gas.


[[Basics Plasma Physics]]
==Thermo-ionic emissio==
To understand what is going on, let us shortly recap some plasma physics. In a typical plasma device, the plasma is present between cathode and anode, which enables current to flow by motion of mobile charged particles. In the plasma, most of the electric current is carried by electrons because the electron mobility is much higher than that of the ions, due to the lower mass. The critical places of current continuity are the interfaces between plasma and metal. On the anode side, electrons fall into the conduction band, thereby liberating the potential energy known as the work function of the anode (about 4 eV per electron for most metals). On the cathode side, however, electrons are prevented from escaping by a potential barrier, the work function of the cathode.
To understand what is going on, let us shortly recap some plasma physics. In a typical plasma device, the plasma is present between cathode and anode, which enables current to flow by motion of mobile charged particles. In the plasma, most of the electric current is carried by electrons because the electron mobility is much higher than that of the ions, due to the lower mass. The critical places of current continuity are the interfaces between plasma and metal. On the anode side, electrons fall into the conduction band, thereby liberating the potential energy known as the work function of the anode (about 4 eV per electron for most metals). On the cathode side, however, electrons are prevented from escaping by a potential barrier, the work function of the cathode.


Figure \ref{fig:pot_distr} shows a sketch of the potential distribution for a generic case. The voltage is not evenly distributed but concentrated in the sheaths near the cathode and anode. As indicated above, the potential drop in the cathodic sheath is the most significant of the mechanism that liberates electrons from the cathode. In contrast, the anode drop, can be positive or negative depending on arc current, anode area, and other factors affecting the electrons current arriving at the anode.
The nature of the discharge may create conditions which enable a fraction of the electrons to overcome the potential barrier, leading to electron emission. Depending on the character of those conditions, we distinguish different electron emission mechanisms. Electrons can be emitted during individual events, such as ion impact, or by collective events, such as high cathode temperature (thermionic) and/or a high electric field on the cathode surface. The collective thermionic and field emission can non-linearly amplify each other known as thermo-field emission. The class of emission by individual events are called 'glow' discharges, and emission by collective events 'arc' discharges.
 
The nature of the discharge may create conditions which enable a fraction of the electrons to overcome the potential barrier, leading to electron emission. Depending on the character of those conditions, we distinguish different electron emission mechanisms. Electrons can be emitted during individual events, such as ion impact, or by collective events, such as high cathode temperature (thermionic) \footnote{The escape of electrons outside the solid due to the temperature can be understood by considering the Fermi-Dirac distribution $\frac{dN(E,T)}{dE}=\frac{4\pi(2m_e)^{3/2}}{h^3}\frac{E^{1/2}}{1+\exp{\frac{E-E_f}{kT}}}$, which describes the number of electrons with a kinetic energy in the range ($E,E+dE$). The electrons of the 'electron gas' is confined to the solid volume by a potential barrier (also known as work function), $\phi$, above the Fermi level. If the 'electron gas' is heated, some electrons (the ones in the tail of the energy distribution) will have enough energy to overcome the barrier.} and/or a high electric field \footnote{At high electric field strength, the potential barrier at the surface due to the mirror image field (the free electron in the metal rearrange to compensate a external free charge) and the external applied electric field become a hill of sufficiently small width through which electron can tunnel quantum mechanically.} on the cathode surface. The collective thermionic and field emission can non-linearly amplify each other known as thermo-field emission. The class of emission by individual events are called 'glow' discharges, and emission by collective events 'arc' discharges.


Collective thermionic, and/or field emission can be stationary. For arc discharges this is, however, not the case: the emission is related to energy dissipation and net heating of the cathode, which can enhance the temperature and associated electron emission, a so-called thermal run-away process. Locations where this occurs can explosively evaporate, leading to a new form of electron emission that is inherently non-stationary because the emission location is changed by the explosion, the plasma expansion and the increase of the hot spot area by thermal conduction. This non-stationary form of emission is called explosive electron emission or arcing.
Collective thermionic, and/or field emission can be stationary. For arc discharges this is, however, not the case: the emission is related to energy dissipation and net heating of the cathode, which can enhance the temperature and associated electron emission, a so-called thermal run-away process. Locations where this occurs can explosively evaporate, leading to a new form of electron emission that is inherently non-stationary because the emission location is changed by the explosion, the plasma expansion and the increase of the hot spot area by thermal conduction. This non-stationary form of emission is called explosive electron emission or arcing.


[[Model of Arcing]]
==Model of Arcing==
 
The electron emission at the cathode spot occurs in the form of discrete explosive electron emission splashes, so-called 'ectons'. These quanta of the explosive process represent the minimum actions required for the explosive events. The duration of one ecton is about $\sim$10 ns, the current $\sim$1 A, and the size of the emission centers is about $\sim1$ $\upmu$m. The explosion leaves a micro crater with a diameter of about $\sim1$ $\upmu$m.
The electron emission at the cathode spot occurs in the form of discrete explosive electron emission splashes, so-called 'ectons'. These quanta of the explosive process represent the minimum actions required for the explosive events. The duration of one ecton is about $\sim$10 ns, the current $\sim$1 A, and the size of the emission centers is about $\sim1$ $\upmu$m. The explosion leaves a micro crater with a diameter of about $\sim1$ $\upmu$m.


Line 20: Line 17:
Finally, the electron emission, and evaporation ceases, because the thermal conduction has led to an increase of the spot area, lowered the power density, and hence lowered the surface temperature. The explosively formed plasma has expanded, its density is lowered, therefore the cathode sheath thickness has increased, and therefore the electric field at the surface is reduced.
Finally, the electron emission, and evaporation ceases, because the thermal conduction has led to an increase of the spot area, lowered the power density, and hence lowered the surface temperature. The explosively formed plasma has expanded, its density is lowered, therefore the cathode sheath thickness has increased, and therefore the electric field at the surface is reduced.


[[Energy balance]]
==Energy balance==
The transition from the cathode's solid phase to the plasma phase requires energy, which is supplied via the power dissipated by the arc,
The transition from the cathode's solid phase to the plasma phase requires energy, which is supplied via the power dissipated by the arc,


Retrieved from "http://wiki.fusenet.eu/wiki/Special:MobileDiff/4488"